Developed by LUVA.menu, the original Tangram system, which will allow our cards adapt to the needs of your premises. Each Tangram system card from the Ambiente line is equipped with an elastic band. Deciding on the menu card in the basic variant you have the option of using it in combination with folded paper printouts. This simplifies the handling of cards, when a quick menu change is required. You can also buy one of the elements of the Tangram system and install it easily in your cards. Available variants below.
Check out the Ambiente lines
Cards from the Ambiente line have a flexible band, which in the basic version allows you to use paper cards in the form of folded sheets. You can also choose any elements of the Tangram system. Each of them can be easily mounted and dismounted on their own.
Another, slightly more elegant way of fixing the solutions available in the TANGRAM card mounting system are the decorative fittings, located in the back of the menu card. Like the elastic band, they can provide a self-contained, stable fixing for bent sheets of paper (e.g. A3 sheets bent once to A4 size), encompassing them inside the card with their folded stems.
The fittings also serve as a base for other solutions available in the TANGRAM card mounting system. Each can be easily assembled and disassembled independently:
The 5 mm diameter brass tube is a reinforcement for the basic eraser. It extends the life of the paper sheets, which, after all, wear out a little more slowly thanks to the tube. It is also an additional decoration - its metallic sheen adds an extra finish to this type of mount. The tube is made of corrosion-resistant brass in accordance with European standard EN CW612N.
It’s a plastic spring rail that can hold up to 25 cards 120 g, which you can quickly replace. We recommend that the cards applied to the grip have machine-made creasing at the edges.
This is a rail made of the same material as the menu cover. The individual sheets of paper are fixed in it with stainless steel rosette screws. The length of the screws depends on the volume of the menu.
A flexible grip made of the same material as the folder with a card mounted with 4 metal screws. The advantage of this solution is the ability to choose the length of screws allowing for the installation of 20 to 60 menu cards with a thickness of 120 g. Thanks to that, you can fit everything you would like to offer to your guests.
Made of leather or other material identical to the whole card profiled grip with mounted inside elongated snaps which allow you to hold 20 sheets of paper with a 120g tickness. The advantage of this solution is the standard spacing of holes and a quick and easy-to-use snap mechanism.
Inside the grip of leather or other material from which the card is made, strong neodymium magnets are placed to maintain 10 sheets of 120 g thickness. We recommend that the cards used for the grip have creasings, which are, machine-made bends at the edge of the sheet.
The paper pocket in white or black allows you to present four menu pages. Due to the thickness of the paper, in the Tangram system, we recommend using a maximum of 3 pockets for 12 pages of the menu,A4, A4H or A5 size, depending on the size of the menu cover.
Pocket made of PVC material that prevents sticking of foil sheets. It is characterized by high transparency, the ability to use standard printouts from the printer and their protection against dirt. One foil pocket allows you to display four menu pages.
Do you need printed menu cards?
We have created the CREATOR.menu system for you, in which every restaurateur, without the help of a graphic designer, will create a beautiful design based on our templates.
Go to CREATOR.menu
